Velodyne SC-IF/IC User Manual download pdf (Page 5)

Installation — Step-By-Step

www.velodyne.com

SC-IF/IC User’s Manual

Step 1 -

Determine installation location. As stated above, the SC-IF/IC can be mounted virtually

anywhere. The only requirements are that the cabinet fit into

the location, and that there be

proper venting for the audio to be passed into the listening environment.

Step 2 -

Mark installation location. It is useful to place the subwoofer cabinet in its proposed position

and mark the locations of the four brackets that will be used to af

fix the subwoofer to the

framing. Note that the brackets can be mounted ANYWHERE on the subwoofer cabinet, as

long as the brackets do not interfere with the woofer’s operation. Always use all four brackets

in the installation. It is recommended that the cabinet be positioned flush with the face of the

joists for ease of positioning and installation, but this is not required. Make sure the speaker

terminals are facing the direction you intend to run the speaker wire.

Figure 1: Mark bracket locations with a pencil.

Note: The brackets can be attached anywhere on the SC-IF/IC cabinet.

1 2 3 4 5 6 7 8 9 10 ... 13 14

No comments

Velodyne SC-IF/IC User Manual Page 5