Velodyne HD HDL-64E S2.1 User Manual download pdf (Page 12)

www.velodyne.com/lidar

HDL-64E S2 User’s Manual

se this chart to troubleshoot common problems with the HDL-64E S2.

Problem Resolution

Unit doesn’t spin Verify power connection and polarity.

Verify proper voltage – should be 12 volts

drawing about 3-4 amps.

Remove bottom cover and check inline fuse.

Replace if necessary.

Unit spins but no data Verify Ethernet wiring.

Verify packet output from another source

(e.g. Ethereal/Wireshark).

No serial communication Verify RS-232 cable connection.

Unit must be active and spinning for

RS-232 update.

It may take several tries for the update

to be ef

fective.

There are no user service or maintenance requirements or procedures for the

Velodyne HDL-64E S2.

For ser

vice or maintenance, please contact V

elodyne at (408) 465-2800, or log on to our

website at www.velodyne.com/lidar.

Troubleshooting

Service and Maintenance

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 24 25

No comments

Velodyne HD HDL-64E S2.1 User Manual Page 12