Velodyne SC-600 IFC - INSTALLATION REV A Installation Manual download pdf (Page 32)

32 6195-2201

Q – Result code suppression

Determines whether the mobile sends result codes or not.

Application to GSM ATQ0 DCE transmits result codes

GSM to application OK Command valid

Application to GSM ATQ1 Result codes are suppressed and

not transmitted

GSM to application (none) No response

V – DCE response format

Determines the DCE response format, with or without header characters

<CR><LF>, and with the use of numeric result codes.

V0 V1

Information <text><CR><LF> <CR><LF>

responses <text><CR><LF>

Result codes <numeric code><CR> <CR><LF>

Application to GSM ATV0 DCE transmits limited headers

and trailers and numeric result

codes

GSM to application 0 Command is valid (0 means OK)

Application to GSM ATV1 DCE transmits full headers and

trailers and verbose response text

GSM to application OK Command is valid

Z – Default configuration

Restores the configuration profile. Any call is released.

Application to GSM ATZ

GSM to application OK Command valid

&W – Save configuration

This commands writes the active configuration to a non-volatile memory (EEPROM).

Application to GSM AT&W Writes current configuration

to EEPROM

GSM to application OK Command valid

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 55 56

No comments

Velodyne SC-600 IFC - INSTALLATION REV A Installation Manual Page 32