Velodyne SC-600 IFC - INSTALLATION REV A Installation Manual download pdf (Page 48)

48 6195-2201

GSM to application AT+CSCB=1 Deactivate the reception of

CBMs

Application to GSM OK CBM reception is completely

stopped

+WCBM – Cell Broadcast Message Identifiers

Command syntax: AT+WCBM= <mode> [, <mids>, <dcss> ]

This specific command is used to read the SIM file EF-CBMI.

This file is not used with +CSCB command, the application should read this file

(AT+WCBM?) and combine the Message Identifiers with those required for the applica-

tion.

Application to GSM AT+WCBM=”10,100, Write 4 message

1000,10000” identifiers in EF-CBMI

GSM to Application OK CBMIs are stored if

EF-CBMI

Application to GSM AT+WCBM? Read the CBMIs in EF-CBMI

GSM to application +WCBM=”10,100,1000,10000” 4 CBMIs are stored if

EF-CBMI

+WMSC – Message status modification

Command syntax: AT+WMSC= <loc>, <status>

<loc> location number of the stored message (integer)

<status> new status to be stored, as for +CMGL command

Possible responses:

OK if the location is valid

+CME ERROR: 22 if <loc> is invalid or free

+CME ERROR: 3 if the new <status> and the previous one are incompatible (1)

Note 1: The accepted status changes are from READ to NOT READ

and vice versa, and from SENT to NOT SENT and vice versa.

If all the parameters are correct, the module overwrites the whole SMS in the SIM. Only

the first byte (Status byte) is changed.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 54 55 56

No comments

Velodyne SC-600 IFC - INSTALLATION REV A Installation Manual Page 48